If the trommel screen bearing can't be used, it needs to replace a new bearing. There may be many users who use the trommel screen. I don't know how to replace the bearing. The following small series will explain the replacement steps of the trommel screen bearing.
Trommel screen acts as a secondary or tertiary crushing material in the sand production line and is a finely broken trommel screen commonly used in the mining crushing industry. Since the machine is mostly finely divided, it is easy to generate a large amount of dust. Everyone knows that dust is extremely damaging to the bearings, so the staff needs to clean the bearings regularly. Here we will teach you how to properly clean the trommel screen bearing:
1. The bearing to be disassembled should be immersed in gasoline or kerosene at a temperature of 100 ° C for half an hour earlier, in order to melt the grease on the bearing surface;
2. After the bearing is soaked, use a professional cleaning brush to clean the oil on the inner ring of the bearing, rolling, rolling element and cage.
3. Cleaning the outer ring of the bearing, when cleaning, you need to pay special attention, you must slowly rotate the outer ring of the bearing, in order to be more effective cleaning;
4. After cleaning, you need to dry the bearing with a dry cloth, and then apply the mother's lubricant, the purpose is to facilitate the installation of the bearing;
In addition, if the cleaning workload of the bearing is large, the combination of rough washing and fine washing can be used, which can save the cost of purchasing gasoline or kerosene.
