One man can operate small mini gold panning trommel screens
Gold Panning Trommel Screen
A gold panning trommel screen is the smallest machine in a wash-plant line: a rotating screen drum that breaks up clay, rejects oversize rock and hands a classified gold-bearing slurry to a sluice or concentrator.
The units on this page are sized for one operator. The GMTS0519 starts at 550 kg and 5 t/h, tows behind a pickup and is running within half a day of reaching site.
What a Gold Panning Trommel Screen Is Built to Do
Panning-scale ground is rarely uniform. River gravel, floodplain sand, cemented clay and cobbles arrive in the same bucket, and the gold is usually fine enough that it will follow the water wherever the water goes.
If the first stage does not break the clay apart and screen the feed into size bands, no downstream equipment will hold that gold. Making the rest of the circuit work is the entire job of the screen.
That is why the machine is judged on three things at this scale: whether it disaggregates sticky ground, whether the aperture matches the gold in your deposit, and whether one person can keep it fed and clear.
Why One Operator Is Enough
Panning-scale operations cannot justify a crew. Every design decision on these units is aimed at a single person running the gold panning trommel screen alone, and the numbers back it up.

Towable frame of the gold panning trommel screen ready to move between claims
The smallest model weighs 550 kg and rides on a towable axle or a skid-mounted frame, so it moves behind a pickup across unpaved tracks rather than on a low-loader. There is no concrete pad to pour and no crane on site.
Assembly is listed at roughly half a day, four hours of mechanical setup, drum levelling and water pump connections. Field crews regularly complete it in that window.
Feeding is done by hand or with a small excavator, and the machine runs on a 1.5 kW drive on the GMTS0519, which means a modest generator or a small single-phase supply is enough on most sites.
A gold panning trommel screen at this size does not need the power infrastructure of a production pit.
How One Pass Washes and Classifies
Feed enters the gold panning trommel screen through a hopper fitted with a round-bar grizzly that rejects the oversize rock before it reaches the drum. Bar spacing is fixed at order time, and an I-beam grid is available where boulders dominate the ground.

Drum and spray manifold inside the gold panning trommel screen
Inside the drum, a spray manifold and the tumbling load break the clay down.
Two woven high-manganese decks then cut the material into size bands in the same pass: a 25 mm inner deck holds back coarse stone that rolls out through the side chute, while a 6-10 mm outer deck passes the fines that carry the fine gold.
On the two-outlet configuration the under-5 mm material is discharged to the gold chute and collected through one sluice, and the 5-30 mm fraction leaves through a second outlet.
Nothing drops out of the bottom of the drum, so every fine particle is routed to a recovery device rather than to the tailings pile.
Screen segments bolt out individually, which matters more on a one-man machine than on a plant: a worn area is swapped in hours without lifting the drum, and no lifting equipment is needed.
Specifications for the Smallest Models
Two models cover this scale. The GMTS0519 is the single-claim and bulk-sampling build of the gold panning trommel screen; the GMTS1020 roughly triples the throughput for a two-person operation working a larger pit. Both accept feed up to 300 mm and discharge at 0-100 mm.
| Model | Capacity (t/h) | Power (kW) | Drum Ø (mm) | Drum length (mm) | Feed size (mm) | Discharge (mm) | Overall L×W×H (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| GMTS0519 | 5-10 | 1.5 | 500 | 1900 | ≤300 | 0-100 | 3000×1000×1800 | 550 |
| GMTS1020 | 10-30 | 4.0 | 1000 | 2000 | ≤300 | 0-100 | 3390×1400×2140 | 1500 |

GMTS0519 gold panning trommel screen, the 550 kg single-operator model
Both machines are fabricated in Q235 carbon steel for the hopper, main frame and drum housing. In remote ground that matters for repair as much as for strength, because a cracked frame can be welded on site with standard equipment.
Field Practice That Protects Fine Gold
At low tonnage the losses come from how the machine is run, not from how it is built. Four habits carry most of the difference.
- Balance water flow and pressure. Too little water leaves clay unwashed and carries gold out with the waste rock. Too much velocity washes fine gold straight over the sluice riffles.
- Feed at a steady rate. Dumping a full bucket into the hopper at once shortens the washing residence time in the drum and pushes unwashed material through.
- Check the mesh for blinding. Wedged stones and worn panels cost recovery quietly. The accessible frame lets you clear mesh or swap a panel during a shift break.
- Use remote support early. When the ground changes character mid-campaign, remote technical support helps adjust spray positioning and drum slope before a shift is lost.
Choosing the Recovery Setup Behind the Screen
The gold panning trommel screen is the first stage, and what sits behind it should match the gold size in your deposit rather than the machine's tonnage.
For coarse, visible gold, a mat sluice with polyethylene recovery carpet takes the bulk of the catch at almost no running cost.
For dust-size gold that a mat will not hold, a centrifugal concentrator works the -6 mm undersize, and the sluice and concentrator concentrate is finished on a shaking table.
At this scale most buyers run the trommel with a sluice plus one concentrator, and add equipment only when the deposit justifies it. The modules are designed to be added in stages rather than bought as a full line on day one.

Sluice and recovery mat behind the gold panning trommel screen
Certifications and Quality Control
CE/ISO certified manufacturing processes, with named patent certificates and CE certification for placer gold washing plant equipment. Certificates are shown below, and hard copies travel with the shipping documents.

Patent Certificate

Patent Certificate

Patent Certificate

Patent Certificate

CE

About Sinolion Machinery
Zhengzhou Sinolion Machinery Co., Ltd. builds mobile and stationary trommel screening machines, rock gold plants and gold washing plants in its own factory rather than sourcing them from trading partners.
Trommel plants have been shipped to customers in Africa, South America, Southeast Asia and the Middle East, and recent alluvial wash plants from the Zhengzhou factory are working in Ghana, Nigeria, Sudan, Indonesia and Russia.
YEARS HISTORY
EXPORT VOLUME
COUNTRIES
GLOBAL PARTNERS
Frequently Asked Questions
Q: What size deposit suits a gold panning trommel screen?
A: It fits single claims, test pits, bulk sampling and seasonal river workings. The GMTS0519 processes 5-10 t/h and the GMTS1020 10-30 t/h, so both are matched to hand feeding or a small excavator rather than a production fleet.
Q: Can one person really run it?
A: Yes, that is the design brief. It weighs 550 kg in the smallest build, tows behind a pickup, needs no concrete pad or crane, and assembles in about half a day. The drive on the GMTS0519 is 1.5 kW.
Q: How much water does it need?
A: Two demands: spray water in the washing drum and a steady supply to whatever recovery device sits behind it. Both are sized for the circuit rather than the drum alone, and with a settling pond and a return line most of the process water is reused.
Q: Will it handle sticky clay?
A: Light clay breaks down under the drum's spray manifold and tumbling load. Heavy, clay-cemented ground sits outside this machine's envelope, and a rotary scrubber is the correct tool there instead.
Q: What recovery rate can I expect?
A: For a plant as a whole, 90-97% is the honest planning range, and the figure depends on how the gold sits in your ground. On the -6 mm concentrate stream, adding a centrifugal concentrator reaches about 98% in our tests under standard gravity conditions.
Q: What is the smallest order, and how long does it take?
A: The smallest order is a single plant. Standard builds leave the factory in about 15 days, and two or three units together take roughly 30 days. Main machines carry a 12-month warranty with spares matched to the model.
Get a Quote
Send the ground type - sandy, clayey or tailings - the capacity you need in tonnes per hour and your site power situation.
The reply is a configured flowsheet with a named model and a factory price, not a generic list figure. Our engineers size the gold panning trommel screen and the recovery package together.
Zhengzhou Sinolion Machinery Co., Ltd. is one of the most credible manufacturers and suppliers of one man can operate small mini gold panning trommel screens in China. Please feel free to buy high quality one man can operate small mini gold panning trommel screens for sale here from our factory. Good service and reasonable price are available.
Hot Tags: One man can operate small mini gold panning trommel screens, China, manufacturers, suppliers, factory, price, for sale, gold trommel for sale craigslist, gold trommel screen, mobile diesel gold trommel tts10, Mobile Gold Washing Trommel














