Gold Centrifugal Separator

The rotating drum of the gold centrifugal concentrator rotates at a high speed at a certain number of revolutions, and the ore pulp is sent to the inner wall of the rotating drum in two places by the ore separator through the ore nozzle. The slurry rotates with the drum at high speed. Under the action of centrifugal force, heavy minerals are deposited on the inner wall of the drum and rotate with the drum. The light mineral particles in the slurry rotate with the drum at a certain differential speed. A certain helix angle flows from the ore-feeding end to the ore-discharging end in the direction of the drum slope, and then discharges through the ore-discharging separator at the end, which is called tailings. After 3 minutes of sorting, the ore separator automatically turns away from the original normal position and stops feeding the ore into the drum. After the tailings are discharged, the ore separator automatically turns away from the original normal position and prepares to intercept the concentrate , Then the high-pressure flushing water valve automatically opens, and the high-pressure flushing water flushes down the concentrate deposited on the inner wall of the drum. After the concentrate is flushed, the high-pressure water valve automatically closes. After the concentrate is discharged, the discharge separator, The mine separator is automatically reset to start the next sorting cycle.

Automatic gold centrifugal concentrator

The model and quantity of gold centrifugal concentrator are equipped according to the processing capacity required by the customer.

The gold centrifugal concentrator is equipped with imported bearings, and the inner tank is made of polymer wear-resistant material, and the wear resistance is more than ten times that of steel.

Inlet particle size: ≤6mm, recoil water pressure: 0.1~0.3MPa, slurry water concentration is about 30%.

The enrichment ratio is as high as 1:1000, and the gold recovery rate of monomer particles is over 90%.

Operation precautions:

(1) It is necessary to stabilize the feed volume, feed concentration and feed size. The slag must be carefully separated from the mine.

(2) To prevent the clogging of the flushing nozzle, this requires the flushing water to be clean and free of grass residue.

(3) It is necessary to check whether the control mechanism is flexible, and whether the ore division, ore breaking, and ore flushing are coordinated.

(4) Pay attention to check whether the parts of the equipment are worn or broken, and whether the water pressure meets the requirements. If there is water leakage or slurry leakage, it must be dealt with in time.

Zhengzhou Sinolion Machinery Co., Ltd. is one of the most credible manufacturers and suppliers of gold centrifugal separator in China. Please feel free to buy high quality gold centrifugal separator for sale here from our factory. Good service and reasonable price are available.

Hot Tags: gold centrifugal separator, China, manufacturers, suppliers, factory, price, for sale, Cheap Firewood Trommel Screen, , , Large screening equipment, Gold Centrifugal Concentrator