Placer Gold Separating Machine
video
Placer Gold Separating Machine

Placer Gold Separating Machine

Processing Capacity: 80 to 150 Tons per Hour (TPH)
Applicable Ore Types: Alluvial gold, sand gold, river placer, clay-rich gold deposits, tin/coltan sands
Chassis Setup: Reinforced multi-axle heavy-duty trailer
Feed Method: Direct excavator or loader continuous dump
Power Drive System: Centralized electric drive (easily powered by a standard site diesel generator)
Water Integration: Optimized water spray manifolds with quick-connect pump couplings
Send Inquiry

 

 

A placer gold separating machine takes alluvial gravel and returns gold you can weigh. Hopper, trommel drum, manganese mesh, gold mat and a smelting furnace, all carried on one towable frame.

 

That sentence is the whole product. The rest of this page is about the choices inside it, because those choices decide how much gold you keep.

GMTS 1548 placer gold separating machine on its trailer drum and feed hopper in a factory yard

 

 

What This Machine Separates

 

It does one thing: it turns a pile of alluvial material into a bar. Everything between those two points is a series of decisions rather than a single mechanism.

 

That is why the specification sheet reads like a parts list. Motor brand, gearbox type, coupling, brake, mesh, mat, furnace. Each line moves either the price or the recovery.

 

The material is the other half of the specification. Rounded river gravel and clay-bound terrace ground do not behave the same way through the same drum.

 

Hopper, drum, water lines and drives on one trailer frame.

Inside the trommel drum of the GMTS 1548 showing the bolted manganese screen panels and support frame

 

 

From Feed to Gold Bar: The Four Stages

 

On a placer gold separating machine the chain is short enough to describe in four steps, and each step has a failure mode worth knowing before you buy.

Feed goes into the hopper, where water meets it. From there the drum classifies: everything under the mesh falls through, everything over it leaves at the far end. Blocking here is usually a feed-size problem, not a machine problem.

 

The undersize lands on the mat. Gold, denser than the sand and soil around it, settles into the mat while the lighter material washes across and away. A mat packed with clay has stopped working as a gravity trap.

 

What comes off the mat is concentrate, not gold. The furnace turns that concentrate into a bar you can weigh and sell. A furnace smaller than one clean-out leaves concentrate waiting.

Water pump and the red sluice tray that carries the gold mat on a GMTS 1548 trommel

 

 

What Actually Moves the Price

 

On a placer gold separating machine four choices move the number more than anything else: the motor brand, the gearbox type, whether the drum is enclosed, and whether the furnace ships with it.

 

Ask for the quotation broken into those four lines instead of one total. Two quotes for the same drum can differ on the motor alone, and a single figure hides which one you are comparing.

 

The furnace is the line buyers most often drop to save money, and it is the one that decides whether concentrate leaves the site as a product or as an unfinished pile.

Bar grizzly over the feed hopper scalping oversize before material reaches the trommel drum

 

 

Choosing the Drive Train

 

The drive is where most of the specification choices sit, and the sheet lists them explicitly rather than hiding them in a model number.

 

Motor brand is a genuine choice: SEW, ABB, Sumitomo or Siemens from Europe and Japan, or one of five Chinese makes - Guomao, Yutong, Taixing, Nangaochi or Tailong. The enclosure is sealed and compact either way.

 

Behind the motor is a shaft-mounted or underslung gearbox reducer, and ahead of it a YOX or YOT constant-filling hydrodynamic coupling. That coupling is what lets the drum start under a full load instead of stalling.

 

A brake completes the train, sized for balance as well as stopping force. Together these four parts are the difference between a drum that starts every morning and one that trips the supply.

 

 

Mesh That Comes Off With a Spanner

 

The screen is high manganese steel wire, and the support frame carries it across its full width. Spreading the load across the frame rather than a few points is what keeps the wire from fatigue-cracking early.

 

Panels are fixed with screw nuts. That sounds like a minor detail until a panel tears at the far end of a shift: the alternative is cutting and re-welding on site, with the crew standing idle.

 

Holes in this mesh resist blinding better than a punched plate, and the drum can be supplied fully enclosed or open, depending on how much dust and spray the site will tolerate.

 

On-board generator set, where the site has no supply of its own.

 

 

The Mat Does the Recovering

 

Inside the drum: lifters turn the load over rather than letting it slide.

 

On a placer gold separating machine everything upstream only prepares material. The mat is the stage that holds gold, and its logic is gravity rather than chemistry.

 

Soil and sand with lower specific gravity wash across the mat and leave with the water. Particles with higher specific gravity drop out of the flow and stay until the mat is cleaned out.

 

That is the whole recovery principle, and it explains why mat condition matters more than mat area. A mat that is packed solid with clay has stopped being a gravity trap, whatever its size.

 

Smelting: 10-15 kg a Batch

On a placer gold separating machine the furnace is the stage most buyers underestimate, because it is the one that turns a concentrate pile into something you can sell.

 

It is rated 10 to 15 kg per batch, and the moulds run 100, 200, 500 and 1,000 g. That is a batch process, not a continuous one: you smelt when the mat has been cleaned down, not every hour.

 

Sizing the furnace against the mat clean-out is the practical question. A mat that yields more concentrate than the furnace can take in a batch means concentrate sits waiting between runs.

 

What Trailer Mounting Changes

Everything sits on one frame: hopper, drum, water lines, drives, and in the photographed unit a generator set as well.

 

That changes what site preparation means. There is no foundation to pour and no structure to erect - the machine arrives, is levelled, and is fed.

 

It also changes what you can promise a client. A unit that can be moved between claims is a different commercial proposition from a plant that is built once.

 

Access still has to be arranged. The frame carries multiple road wheels, and a unit this size is towed rather than carried on a pickup.

Water spray monitor with a stainless control handle used to wet feed at the trommel hopper

 

 

Bare Trommel, This Machine, or a Full Plant?

 

Drive motors and the pump set, mounted on the same frame as the drum.

 

Three things get sold under similar names, and the difference decides what you should buy.

Bare trommel This machine Washing plant
What ships drum and drive drum, mat, water system, furnace feed preparation, the chain, tailings handling
Site work you build the rest level pad only foundations and structure
Moves between claims yes yes no
Best when you already own sluices you want a first gold bar the deposit justifies a fixed line

 

  • A bare trommel screen classifies material and nothing else. You add the mat, the water and the smelting yourself, on site.

 

  • The placer gold separating machine on this page is the middle column: classification, capture and smelting on one frame.

 

  • A full sand and gold washing plant is the right answer once the deposit justifies feed preparation and tailings handling.

 

  • If the ground moves often, the mobile washing trommel is the closer comparison than a fixed plant.

 

 

What the Site Needs Before It Arrives

 

Four things have to be true before a placer gold separating machine lands, and none of them require a building.

 

Power. The drive is an electric motor, so the site needs a supply, or the machine needs its generator set. Confirm the supply before the shipping date, not after.

 

Water. Both the spray at the hopper and the mat need water, and the spray needs pressure rather than volume alone.

 

A level pad. No foundation is poured, but the frame has to sit level, or the mat will not hold gold evenly.

 

Turning room and tailings space. A towing vehicle has to reach the site and turn, and the washed material has to go somewhere.

 

 

Questions Buyers Ask

 

Q: Which motor brands can I specify?

A: Any of the four European and Japanese makes, or a Chinese equivalent. The five Chinese options are Tailong, Nangaochi, Taixing, Yutong and Guomao.

Q: Can the screen be changed without welding?

A: Yes. Panels are held with screw nuts and lift off individually, which is the point of the fixing method.

Q: Enclosed drum or open?

A: Both are offered. The choice follows the material and how much dust and spray the site can tolerate.

Q: What does the furnace take?

A: 10 to 15 kg per batch, with 100, 200, 500 and 1,000 g moulds. It smelts the concentrate into bars.

Q: Can I order it without the furnace?

A: Ask for that line to be quoted separately. If you already smelt on site, the furnace is the obvious item to take off - just remember what it was doing.

Q: Does it need a mains supply?

A: The drive is an electric motor, so power is required. The unit photographed here carries its own generator set; a site supply does the same job.

Q: What throughput should I expect?

A: This sheet lists components rather than a tonnage. Throughput follows the drum size, so it is quoted against your material rather than read off this page.

 

 

Send Your Specification

 

The useful message is short: the material, the tonnage you want to run, whether you need the furnace on site, and what power the site can supply.

 

From that, the reply can name the motor and gearbox combination, the mesh and mat, and whether the drum should be enclosed.

 

A placer gold separating machine is configured rather than picked from a list, so the earlier that conversation starts, the fewer parts get changed later.

 

 

Zhengzhou Sinolion Machinery Co., Ltd. is one of the most credible manufacturers and suppliers of placer gold separating machine in China. Please feel free to buy high quality placer gold separating machine for sale here from our factory. Good service and reasonable price are available.

Hot Tags: placer gold separating machine, China, manufacturers, suppliers, factory, price, for sale, High Efficiency Mobile Trommel Screen Best Price Hot Sale, Iron Remover, Commercial Compost Screener, Efficient Rotary Garbage Sorting Drum Screen, Mobile Gold Panning Machine, Firewood Drum Screen

Send Inquiry