The amalgamation cylinder is similar to the ball mill, so it is also a mercury mill, amalgamation ball mill, small amalgamation ball mill, etc. It uses a rubber liner as the lining to avoid the contact between mercury and iron, reducing the loss and failure of mercury. The grinding effect of the high chromium steel ball plays the role of forced amalgamation, which can effectively break the oxide film on the surface of gold particles, play the role of forced amalgamation, and improve the recovery rate of gold.
The amalgamation method is an ancient gold selection method, which is based on the selective wetting of gold particles in the slurry by mercury to form gold amalgam (ie amalgam), which separates gold from other base metal minerals and gangue. The amalgamation method is mainly used to recover natural gold that is in a free state or has been dissociated in the mine.
The efficiency of the amalgamation gold separation process is not high. Even from gold ores suitable for amalgamation, the high recovery rate of gold is only 60-80%. The amalgamation method is only suitable for extracting large particles of gold with a particle size of 0.15-0.03 mm , and require the surface of the gold particles to be clean, without free gold polluted by other substances that may hinder the contact between gold and mercury.
Therefore, in the production process, the amalgamation method is mostly used as an auxiliary process. With the increasingly stringent environmental protection requirements, its role is increasingly restricted. Many mine amalgamation operations have been replaced by gravity flotation and cyanidation processes. Advanced mineral processing equipment ball mills, crushers, shakers, vibrating screens, etc. With greater effect, the application of minerals is more comprehensive, the waste of tailings is less, and the process is more advanced. Mercury and gold form three compounds: AuHg2, Au2Hg, Au3Hg, and also form a solid solution with a mercury content of up to 16.7% in gold.

Whether mercury can wet gold well depends mainly on the composition of gold and mercury, the surface state of gold and the quality of mercury, the concentration of slurry at operating temperature and the pH of the slurry, etc.
The gold extraction effect of the amalgamation method is directly related to the degree of dissociation of gold particles from the minerals surrounding it. Therefore, it is of great significance to choose a reasonable grinding operation. Under the premise of ensuring that there is no excessive crushing, appropriately increasing the grinding fineness will help to improve the recovery rate of amalgamation.
Pure gold is easily amalgamated. In addition to gold, gold particles in nature and ores still contain silver, copper, iron and other impurities, which brings difficulties to amalgamation. When gold contains 10% silver, the ability to be wetted by mercury will be significantly reduced.
Pure mercury does not amalgamate well. Containing a small amount of gold, silver and base metals can improve its wetting properties. Mercury contains 0.1-0.2% gold. Accelerates the amalgamation process. With 0.1% silver in mercury, the ability to wet gold can be increased by 70%, and when the gold and silver content reaches 5%, it can be doubled. The amount of copper, lead and zinc contained in mercury is less than 0.1% respectively, which can promote the wetting of mercury to gold. If there is an oxide film or its chemical adsorption film on the surface of the gold particles, or if it is polluted by other minerals or gangue, it will be difficult for mercury to wet.
There are two types of amalgamation methods: internal amalgamation and external amalgamation. Internal amalgamation is the amalgamation operation performed in the grinding equipment while grinding the ore to dissociate the gold. The commonly used equipment includes disc rolling machines, ramming machines, and amalgamation cylinders. External amalgamation is the amalgamation and gold extraction outside the milling equipment, and the commonly used equipment is amalgamation board.
Internal amalgamation is a relatively common gold extraction method used in placer gold mines in my country. It is mainly used to extract gold from heavy sand concentrates and separate gold from other birth minerals. The commonly used amalgamation equipment is the amalgamation cartridge. In a small number of rock gold mines, tamping machines are used for internal amalgamation operations to recover coarse-grained monomer gold, while most rock gold concentrators use external amalgamation as an auxiliary process, which is installed at the discharge port of the ball mill and the overflow of the classifier Amalgam plate, used to recover monomer dissociated gold.
The main disadvantage of the internal amalgamation method is the "dusting" of the mercury. When grinding ore, mercury is divided into particles, which are wrapped and covered by oxide film of base metal, lubricating oil film and slime particles, etc., and lose the ability to combine with each other, resulting in powdering of mercury. Mercury fines are difficult to separate from the ore being processed, most of the fine mercury is lost, and the fine mercury can also carry gold. Especially when finely grinding silicified ores and ores containing arsenic and antimony, the phenomenon of mercury powder is serious. The loss of mercury is also large. In internal amalgamation operations, the loss of mercury per ton of ore fluctuates between 2-15 grams. The lost mercury powder often contains 3-15% gold, which reduces the recovery rate of gold.











