Precautions for trommel screen:
1. Model Selection
The drum screening type directly affects its screening effect and later use. The selection should be based on the screening materials and processing capacity. Moreover, since most of the drum screens are used in stone plants, it is also necessary to consider whether the drum screens can be used together with other equipment. In addition, users should also specify the height of the machine's feed inlet and the height limit of the machine body when selecting the model.
2. Operation
During the use of the roller screen, too much material shall not be put into the feeding process, otherwise the screening effect will be affected, the motor may be overloaded, the vibration motor may be burnt, which will impact the screen mesh and shorten its service life.
3. Screening environment
In the outdoor screening link, the roller screen needs to have certain protective measures to prevent the motor from partially entering water and burning the motor after startup.
4. Timely clean the residues
When the rotary screen is shut down, it is necessary to pay attention to that the rotary screen shall be shut down after the sand block in the rotary screen is screened, so as to prevent the motor from being burnt out due to excessive motor compliance when the rotary screen is opened.
The above are the matters needing attention during the use of the roller screen. During the use of the roller screen, it is necessary to frequently observe the lubrication condition of the drive part and the transmission, and regularly clean and add an appropriate amount of lubricating oil.
