The trommel screen is a new generation of screening equipment designed and produced by combining the advantages of various vibrating screens. It overcomes the screen sticking problem that occurs when various vibrating screens screen wet materials, and greatly improves the output and reliability of the trommel screen. , suitable for screening coal, coal gangue, coke, slaked lime and other wet and easily blocked materials. It can be widely used in power plants, coking plants, building materials, metallurgy, chemical industry, mining and other industries.
The trommel sand screening machine has compact structure, reasonable vibration parameters, stable movement, convenient maintenance, and high screening and dehydration efficiency. They are widely used in material dewatering, de-intermediation, desliming and dry and wet classification; they can also form a closed circuit with the ball mill in the grinding circuit to classify fine-grained materials.
Due to special circumstances, the customer requires the height of the discharge port to be lower from the ground, and there are certain restrictions, then if the vibration motor is placed below, the height will be increased, which is inconsistent with the customer's requirements. How to solve this problem? The height of the screen box is fixed and cannot be changed at will. Then, in addition to the screen box, the vibration motor that can be modified for the trommel sand screen machine can be changed. Side-by-side arrangement, which not only meets the requirements of customers, but also does not affect the efficiency of the linear vibrating screen during work.
Considering that due to the different environments of different customers, the size of the plant is different, which limits the installation position of the vibration motor of the trommel screen sand machine. According to the different installation positions of the vibration motor of the linear vibrating screen, it can be divided into: upper vibration type, lower vibration type and side vibration type.
Width restrictions, different factories have different requirements. In addition to the fixed width of the lower equipment model, a certain width still needs to be set aside for operations such as feeding, but because the width of the factory site is fixed, after setting aside a certain width such as feeding, the rest is the width of the screen machine , If the trommel sand screener is too wide, it will not fit, and a screen machine with a smaller width needs to be changed. Once the width of the trommel sand screener is narrowed, the processing capacity will be relatively small, and then it will affect the entire production schedule. Therefore, without affecting the processing capacity, the width cannot be reduced, so we can only start from the position of the vibration motor, and install the double motors side by side at the bottom to reduce the width of the screen machine. In this way, the width and length are not If it changes, the throughput will not change.
