The trommel screen rotates the sieve drum at a certain speed through the reducer, the material is separated from the bottom to the top through the sieve drum, the fine material is discharged from the lower part of the sieve drum, and the coarse material is discharged from the lower end of the sieve drum. The trommel screen can be equipped with a cleaning device. During the screening process, the screen body is cleaned, so that the screening process is kept clean, not blocked, not stained, and does not affect the screening effect.

Precautions:
1. Check whether the trommel screen coupling is squeezed out or damaged.
2. Check whether the motor is running normally.
3. Check the noise of the vibration machine when the reducer is running.
4. Check the temperature rise of the main bearing before and after the trommel screen.
5. Check whether the sound of the trommel screen is normal and whether there is any leakage in the screen of the screen body.
6. Check whether the trommel screen coupling and gear guard are intact and firm.
7. Replace the lubricating parts of the trommel screen according to the lubrication requirements, and make a record.
8. Check whether the safety protection equipment of each part is reliable.
9. Check the motor winding, phase-to-phase insulation and phase-to-phase short circuit every month.
The trommel screen runs slowly and evenly during the screening process, with small shock and vibration, stable operation, simple installation, small maintenance, simple maintenance and long service life. It is a very practical tool.











